Bathtub Packaging Receiving: Inspect the Shell, Finish and Accessories
Short answer: inspect the carton or crate, corners, shell, finish, supports, waste parts, documents and labels before the bathtub is moved into the room. A concealed chip or missing foot can delay installation after access is gone.
Keep the package until the receiving record is complete.
| Check | Record | Escalate when |
|---|---|---|
| Crate/carton | Crush, puncture, wetness and straps | Impact or water entry is visible |
| Shell/edge | Full and close-up photos | Crack, chip, distortion or sharp edge |
| Finish | Dry neutral-light view | Stain, gloss change or unknown mark |
| Supports | Feet, frame and hardware | Missing, bent or wrong part |
| Identity | Model, size, colour, batch | Label does not match order |
Separate transit damage from handling damage
Use agreed lifting points and protect the finish. If a defect is found, isolate the tub and report it before cleaning, polishing or installation.
Buyer FAQ
Can a carton be discarded immediately?
Keep it until inspection, carrier and supplier requirements are satisfied.
What photos are most useful?
Package, labels, full shell, all corners, defect with scale, underside and accessories.
Should missing parts be noted on the delivery receipt?
Yes, follow the contract and carrier process immediately.
Continue the decision
Compare packaging economics and plan the delivery route.
Bathtub Receiving Inspection Pack