Shower Enclosure Packaging Inspection: Protect Glass, Hardware and Traceability
Short answer: inspect the package, glass edges, corners, holes, hardware, seals, labels and moisture before installation. A carton that looks intact can still hide edge damage or a missing component.
Keep the packaging until the receiving record is signed.
| Check | Record | Escalate when |
|---|---|---|
| Outer package | Crush, puncture, wetness and straps | Impact or water exposure is visible |
| Glass | Edges, corners, holes and surface | Chip, crack, scratch or wrong pane |
| Hardware | Finish, quantity and identity | Corrosion, mismatch or missing part |
| Seals | Profile and length | Deformation or wrong section |
| Labels | Model, pane and batch | Traceability does not match order |
Isolate before installation
Photograph a defect with a scale and identify the package. Do not polish, drill, install or discard damaged material before the supplier and carrier have reviewed the evidence.
Buyer FAQ
Should glass be stored flat?
Follow the exact manufacturer handling and storage instructions; do not invent a universal orientation.
Can a scratch be polished out?
Escalate first. The surface, edge and safety status must be assessed before any treatment.
What is the minimum receiving record?
Package, full components, close-ups of glass edges and holes, labels and any exception note.
Continue the decision
Plan packaging for the distribution route and review glass evidence.
Enclosure Receiving Damage Review