Shower Enclosure Project Specification Pack: Give Every Trade the Same Reference
Short answer: a usable enclosure specification pack combines the model, glass, hardware, tray interface, finished opening, tolerances, packaging, care and handover evidence. It gives the buyer, installer and service team one controlled reference.
Use revision numbers and identify which items are supplier evidence versus project assumptions.
| Pack section | Include | Owner |
|---|---|---|
| Product identity | Model, size, configuration and finish | Supplier/buyer |
| Interface | Tray edge, walls, channel and seal | Supplier/installer |
| Installation | Fixings, adjustment and sequence | Installer |
| Logistics | Carton, pane identity and inspection | Buyer/warehouse |
| Handover | Water test, care card and spares | Project team |
Make exclusions visible
State what the evidence does not prove: for example, a salt-spray test does not define all bathroom service life, and an enclosure drawing does not verify a site that has changed after tiling. Use a change log whenever a finish, pane, hardware item or tray interface changes.
Buyer FAQ
Can a catalogue page be the full specification?
Usually not. It rarely contains finished tolerances, interface sections, packaging and handover records.
Who should receive the pack?
Buyer, installer, site manager, warehouse and after-sales team.
What makes the pack searchable later?
Model, batch, revision, project, site and component codes in the filenames and record.
Continue the decision
Specify beyond glass thickness and build a tolerance pack.
Enclosure Project Specification Pack Review